Zortrax Apoller Smart Vapor Smoothing
Automatic post-processing with the Zortrax desktop smart vapor smoothing device. Achieve the look of an injection moulded part from your FDM prints with the industrial performance. Smart Vapor Smoothing technology evenly smooths out all surfaces including all complex geometries and interlocking or movable parts. Ideal for small to medium production runs.
£5,299.17
Tax included
Free lifetime remote support on all products
Ask us about our discounts for education
Zortrax Apoller Smart Vapour Smoothing
Automatic post-processing with the Zortrax desktop smart vapor smoothing device. Ideal for low to medium production runs. Achieve the look of an injection moulded part from your FDM prints with the industrial performance managed by the proprietary algorithms.
Three Simple Steps
Print- Print parts on any FDM, FMM or LPD 3D Printer. Smooth- Place parts in the chamber and select the smoothing option. Relax- After 3 hours your parts are ready!
Smart Vapour Smoothing Technology
Smart Vapor Smoothing technology evenly smooths out all surfaces including all complex geometries and interlocking or movable parts. Achieved by the automatic management of temperature, pressure and solvent concentration in the smoothing chamber. See below for before Apoller vapor smoothing and after.
Advance Vapor Circulating System
The vapours are circulated upwards to evenly coat the parts. Less solvent is used for any fragile or intricate details to ensure they remain in tact. Once its finished, the condensation system retrieves the excess solvent for reuse.
Key Features
Speed and ease of use- Fully automated smoothing process with machine set up taking only 3 hours.
SVS technology- Smart Vapor Smoothing is the Zortrax proprietary technology for automatic vapor smoothing.
Consistent results- All parts are evenly smoothed time and time again. With no limitations relating to size or geometry.
Compatibility- Acetone and MEK smooth models made on FDM, FFF, LDP 3D printers in ABS, HIPS or ASA based filaments.
Data sheet
- Internal Chamber Dimensions
- 300 x 250 x 250 mm (11.8 x 9.8 x 9.8 in)
- Operating Temperature
- -20° C (-4° F) to 90° C (194° F)
- Operating System
- Android
- Power Supply
- 24 V DC @ 21 A, 500 W
- Compatible materials
- SOLVENT: Pure Acetone or pure MEK only | ZORTAX: Z-ABS, Z-ULTRAT, Z-ULTRAT Plus, Z-ASA Pro, Z-HIPS
- Compatible materials
- Can be used on: ABS, ASA, HIPS
- AC input
- 110 V ~ 13.6 A 50/60 Hz ; 240 V ~ 6.3 A 50/60 Hz
- Connectivity
- Wi-Fi, Ethernet, USB
Automatic post-processing with the Zortrax desktop smart vapor smoothing device. Achieve the look of an injection moulded part from your FDM prints with the industrial performance. Smart Vapor Smoothing technology evenly smooths out all surfaces including all complex geometries and interlocking or movable parts. Ideal for small to medium production runs.