Polymaker PolyMax Tough PC (750g)
Polymax is a set of advanced 3D printing filaments engineered with nano-reinforcement technology from Polymaker, designed to give a high-quality printing and superb mechanical properties.
£37.50
Tax included
Free lifetime remote support on all products
Ask us about our discounts for education
Polymax is a set of advanced 3D printing filaments engineered with nano-reinforcement technology from Polymaker, designed to give a high-quality printing and superb mechanical properties. The Polymax PC is also produced to have great strength, toughness and printing quality for a variety of engineering applications.
Nano-Technology
- Nano-technology is used to manufacture filaments possessing innovative mechanical properties and high-quality printing. With this technology, the material also has an increased toughness and impact resistant.
Packaging
.png)
Notes
- Bed Surface:MAGIGOO PC, BUILDTALK
- Bed Temperature: OFF
- Drying Settings: 80˚C for 8h
- Advised Support Materials: PolySupport™
PM70494
Data sheet
- Printing Speed
- 30mm/s – 50mm/s
- Weight
- 750g
- Nozzle Temperature
- 250˚C – 270˚C
- Bed Temperature
- 90˚C – 105˚C
- Glass Transition Temperature
- 113˚C
- Tensile Strength
- 59.7 ± 1.8 Mpa
- Flexural Strength
- 94.1 ± 0.9 Mpa
- Young’s Modulus (MPa)
- 2048 ± 66 Mpa
- Charpy Impact Strength
- 25.1 ± 1.9 kJ/m2
- Vicat Softening Temperature
- 117˚C
You might also like
Polymax is a set of advanced 3D printing filaments engineered with nano-reinforcement technology from Polymaker, designed to give a high-quality printing and superb mechanical properties.