EnvisionTEC | E-RigidForm
The EnvisionTEC E-RigidForm produces hard, stiff parts, so it is mostly used to print for prototypes and end use.
Free lifetime remote support on all products
Ask us about our discounts for education
EnvisionTEC E-RigidForm
The E-RigidForm is a polyurethane-like resin that 3D prints strong, hard and stiff parts for prototypes and end-use. The high tensile strength compares to that of nylon 6 and polycarbonate. The resin has good heat deflection and water resistance and it is a versatile and though material. It has a hardness value of Shore D 87, which is the same value as a cast urethane plastic. This resin is ideal for a wide range of industrial and consumer applications.
Applications: Aerospace, Automotive, Consumer Goods, Education, Manufacturing
Material Properties
| Description | Value |
|---|---|
| Tensile Strength | 68 - 73 MPa |
| Tensile Modulus | 2950 - 3250 MPa |
| Elongation at Break | 6 - 7% |
| Flexural Strength | 120 - 126 MPa |
| Flexural Modulus | 3340 - 3570 MPa |
| Viscosity | 460 cP at 30° C |
| Hardness Shore D | 87 |
| Heat Deflection Temperature | 62.5° C |
| Impact Izod | 30 J/m |
| Water Absorption | 0.67% at 48 hours |
| Post-Processing For Results Above | UV SCU 2 X 60 min |
Data sheet
- Tensile Strength
- 68 - 73 MPa
- Tensile Modulus
- 2950 - 3250 MPa
- Flexural Strength
- 120 - 126 MPa
- Flexural Modulus
- 3340 - 3570 MPa
- Shore Hardness
- 87
The EnvisionTEC E-RigidForm produces hard, stiff parts, so it is mostly used to print for prototypes and end use.