3DXTech FibreX™ HTS (High Temp Support) 1.75mm 500g
3DXTech FibreX™ HTS is a break-away support material which has been designed for use with high temperature filaments such as PEEK, PEI and PPSU.
£132.50
Tax included
Free lifetime remote support on all products
Ask us about our discounts for education
3DXTech FibreX™ HTS is a high-temperature break-away support filament which is ideal for use in dual extruder 3D printers designed to print high-temperature materials. ThermaX HTS High-Temp Support can be used as a break-away support with the following materials:
- PEKK
- PEEK
- Ultem/PEI
- PPSU
- PSU
Guideline Print Settings
| Nozzle Temperature | Build Plate Temperature | Heated Build Chamber | Bed Adhesion |
|---|---|---|---|
| 350-380°C | 120-160°C | Recommended | PEI or polyimide tape or gluestick applied to glass |
Support Removal: This is a break-away support and is NOT soluble. The support is best removed while the part is warm. If the part cools and support removal becomes difficult, then you can heat the part in a small oven or heated build chamber for 30-45 minutes; then removal will be much easier.
You might also like
3DXTech FibreX™ HTS is a break-away support material which has been designed for use with high temperature filaments such as PEEK, PEI and PPSU.