Anisoprint CFC PA 1,75mm 750g

CFC PA is a new material developed by Polymaker and presented by Anisoprint for continuous fiber coextrusion. Its purpose is to secure a traction between its fiber layers by acting as a grid material with low viscosity. These additional properties allow CFC PA to have a superior part performance. Furthermore, CFC PA also has a rapid cooling and solidification system which increases the accuracy of their fiber placement.

Printing Guidelines

• Temperature: best printed between 250 and 270°C
• Speed : recommended between 10-20mm/s for CFC Process
• Buildplate adhesion: required to be between 55-60°C
• Drying and storage: possibility to be printed from open air with no significant damage. Longer prints require the use of a dryer at 60°C and storage in a dry area such as a sealed box with silica gel
• Nozzles: used with the Anisoprint Composite Brass nozzle or the Composite Steel nozzle if necessary.