Anisoprint - CFC PA - 750g
CFC PA by Anisoprint is specifically designed to be used with their continuous fiber co-extrusion process (CFC). This premium polyamide filament has a low moisture absorption rate and lower viscosity for improved co-extrusion with carbon fiber strands.
$145.00
Tax excluded
Free lifetime remote support on all products
Ask us about our discounts for education
CFC PA is a new material developed by Polymaker and presented by Anisoprint for continuous fiber coextrusion. Its purpose is to secure a traction between its fiber layers by acting as a grid material with low viscosity. These additional properties allow CFC PA to have a superior part performance. Furthermore, CFC PA also has a rapid cooling and solidification system which increases the accuracy of their fiber placement.
Printing Guidelines
- Temperature: best printed between 250 and 270°C
- Speed : recommended between 10-20mm/s for CFC Process
- Buildplate adhesion: required to be between 55-60°C
- Drying and storage: possibility to be printed from open air with no significant damage. Longer prints require the use of a dryer at 60°C and storage in a dry area such as a sealed box with silica gel
- Nozzles: used with the Anisoprint Composite Brass nozzle or the Composite Steel nozzle if necessary.
You might also like
CFC PA by Anisoprint is specifically designed to be used with their continuous fiber co-extrusion process (CFC). This premium polyamide filament has a low moisture absorption rate and lower viscosity for improved co-extrusion with carbon fiber strands.